Notched Plexiglass Tower - HHO Generator Parts

Fully Assembled Advanced Design Notched Tower

Here is the latest improvement to the Tower for the Hydrogen Generator based on the Water4Gas plans.

Earlier designs still work well!  But if you are looking for a very reliable design built for long duty life, this design works best.

The notches are an improvement to hold the electrode wires in position at equal distances. This improves the electrolysis process and prevents the wires from shifting or possibly touching.

The Goop or bonding adhesive is not required. All parts are assembled with acrylic cement, the 3/16” holes are drilled for you, and the notches are fashioned along each edge.

The overall measurements are 2.25” x 5.75” which is a very slight increase in width from the original plans. These lots are fashioned from transparent material.

We have found it to work very well in all our applications and this is the same tower offered in our Deluxe kits.

Helping You Succeed

Greentech Express offers parts along with selling the entire kits. This allows you to buy replacement items, or only order the harder to find components you need to build your own. Please see the other items we list.

The purpose of this system is encouraging the wide spread use of alternative fuels. Hydrogen plays an important role in abundant, safe energy for each of us, and the world at large.

Additional Information

This piece is ready to go. You simply wrap the electrodes around it, and fasten them through the bottom holes.

Enjoy your purchase and we encourage
your feedback and comments!